China Steel Wire Rod Suppliers and Factory - High Quality 5.5mm to 25.0mm Wire Rod Production
Product Description
Wire rod, also called wire rod, usually refers to small-diameter round steel in a coil. The diameter of the wire rod is 5-19 Within the millimeter range (usually 6-9 mm), the lower limit is the minimum size of the hot-rolled steel section. There are many varieties of wire rod.
Among carbon steel wire rods, low carbon steel wire rods are commonly known as soft wires, while medium and high carbon steel wire rods are commonly known as hard wires. Wire rod is mainly used as blank for drawing, and can also be directly used as building materials and processed into mechanical parts.
Materials
Steel Material
Steel wire rods are usually made of low carbon steel or medium carbon steel. Common materials include Q195, Q235, SAE1006, SAE1008, etc.
Specifications
Diameter
The diameter of the wire rod is usually between 5.5mm and 16mm, and the specific diameter can be customized according to requirements.
Length
Wire rods are usually provided in the form of cut-to-length or rolls, and the length can be customized according to customer needs.
Production Process
Hot Rolling Process
Wire rods are usually produced by hot rolling process, where they are heated and rolled to form the desired diameter and shape.
Cold Drawing Process
In some cases, wire rods can also be produced by cold drawing process to improve dimensional accuracy and surface finish.
Surface Treatment
Surface Finish
The surface of the wire rod is usually smooth and suitable for subsequent processing.
Rust-proof Treatment
Anti-rust treatment such as oiling or galvanizing can be performed as required to improve corrosion resistance.
Advantages
High Strength
The wire rod has good strength and toughness, suitable for bearing greater pressure and load.
Good Processability
The wire rod is easy to cut, weld and form, suitable for various manufacturing processes.
Affordability
Relatively low cost makes it an affordable choice.
Application Areas
Construction Industry
Used for concrete reinforcement, steel bars and structural support.
Manufacturing Industry
Used to manufacture springs, steel wires and other industrial products.
Automotive Industry
Used in automotive parts and connectors.
Home Appliance Industry
Used for internal structures and supporting parts of home appliances.
Maintenance
Regular Inspection
It is recommended to regularly inspect the surface of the wire rod to ensure it is free of rust and damage.
Clean
Keep the surface clean to avoid accumulation of dirt and chemicals.
Product Specifications
| Product Name | Carbon steel wire rod |
|---|---|
| Material | SAE 1006 1008 1010 1012 1015 1020 1022 1045 1050NVA, NVD, A, A32, A36, AH32, AH36, B, 16MnL, D32, D36, DH32, DH36, EH32, EH36 |
| Q195, Q235, Q235B, Q345 | |
| 10-50#, 16Mn, 20Mn, 35Mn, 45Mn, 50Mn, 20Mn2, 35Mn2, 45Mn2. | |
| 15CrMo, 35CrMo, 42CrMo, 20CrMo, 12Cr1MoV, 27SiMn, 60Si2Mn, 20Cr, 40Cr | |
| Standard | ASTM B498(Steel Core Wire For ACSR); GB/T 3428(Over Stranded Conductor or Aerial Wire Strand ); GB/T 17101 YB/4026(Fence Wire) |
| Strand); YB/T5033(Cotton Baling Wire Standard) | |
| Diameter | 0.2-6mm |
| Tensile Strength | 350-550MPA |
Application
Can cut carbon steel, stainless steel, copper, aluminum and other pipes and profiles, such as: the tube, pipe, oval pipe, rectangular pipe, H-beam, I-beam, angle, channel, etc. The device is widely used in various kind of pipes profile processing field, shipbuilding industry, network structure, steel, marine engineering, oil pipelines and other industries.
Transport
Frequently Asked Questions
What is the standard diameter range for your steel wire rods?
The typical diameter of our wire rods ranges from 5.5mm to 16mm. However, the overall range can vary between 5mm and 19mm, and custom sizes can be manufactured based on customer requirements.
Which steel materials and grades do you offer for wire rods?
We offer a wide range of materials, including low carbon steel and medium carbon steel. Common grades include SAE 1006, SAE 1008, Q195, Q235, Q235B, Q345, 10-50#, 16Mn, and alloy steels like 15CrMo and 40Cr.
What production processes are used to manufacture the wire rods?
Our wire rods are primarily produced using a hot rolling process to shape the desired diameter. When higher dimensional accuracy and surface finish are required, a cold drawing process can also be utilized.
What options are available for surface and rust-proof treatment?
The wire rods come with a smooth surface finish suitable for subsequent processing. For corrosion resistance, we can apply anti-rust treatments such as oiling or galvanizing according to your specifications.
What are the primary applications of carbon steel wire rods?
Carbon steel wire rods are widely used in the construction industry for concrete reinforcement, the manufacturing industry for springs and steel wires, the automotive sector for parts and connectors, and the home appliance industry for structural supports.
How should steel wire rods be maintained during storage?
We recommend performing regular inspections on the surface of the wire rods to ensure they remain free of rust and damage. It is also important to keep the storage area clean to avoid accumulation of dirt, moisture, and corrosive chemicals.
01020304050607080910111213141516171819









